Sargent & Greenleaf 6120 E-Lock Operating Instructions

If your Heritage Safe comes with the Sargent Greenleaf electronic lock the following video will show you how to change your combination:



Instructions:

  1. The default factory code is 1, 2, 3, 4, 5, 6, #
  2. Use the D-Tab lever (which is located either on the bottom or hinge side of the door)
  3. Push the trigger
  4. Rotate the bolts out (do not close the door)
  5. Press 7,4,* then enter 1, 2, 3, 4, 5, 6, # wait for five quick beeps
  6. After you hear the five quick beeps, press 1, *
  7. Then enter your desired code (it has to be six digits), when you're finished press the #
  8. You will then hear three beeps, then enter your code again for verification
  9. You will hear three beeps once again
  10. Let lock sit for about 10 seconds
  11. Try your new code